What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 02.07.2025 02:38
A circuit breaker is similar, but is resettable.
Because the load is inductive, the current lags the voltage.(by a bit).
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
what exactly is a ‘surge’ protector?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
He then asserts :
Thousands of Netflix fans gather for Tudum - TechCrunch
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
So, the voltage could go up to 500 volts, and the fuse will not open up.
2024–10–10[John johnson John Johnson ]
Now when you have a certain ac resistance, then a current flows in a loop.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
A fuse is a non-resetable over current circuit protector.
One is “what exactly is in a ‘surge protector’ ? ”
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Experts Just Discovered The Most Effective New Weight Loss Drug—And It's Not Ozempic - AOL.com
At one ohm, the resistor has a maximum of 1 watt power.
But… the neutral is now “floating” because of the 1 ohm resistance.
[old diagram got deleted by accident]
What to Watch: Barbara Walters Documentary, LEGO Masters Build Batmobiles and More - TVLine
(Dc diagram shown, AC is similar).
Upvotes:
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
I post the exact comment here.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
The MOV will conduct when the voltage exceeds 50% of line voltage.
At least they know the answer if they wanted it.
This device then solves the entire problem.
It seems Mohan does not understand the difference between a comment and an Answer.
a photo is worth a thousand words.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
but this device (an Inductor) … impedes the rapid changes in the current.
How many boxes 600 x 400 x 200 go into a 20ft container?
2024–10–14 [Omar Gharbi Omar Gharbi ]
eight
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Why do liberals think it is okay to steal votes while the rest of us obey the law(s)?
One
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
These are simplified answers to the original question, and does not change anything I wrote above.
This is where this question deviates from being a 'generic' question, and becomes more specific.
He then describes the function of a fuse.
There are three different concepts here that are getting confused.
An AC voltage/ current source, and an ac inductive load.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Edit 2024–10.
What does a fuse do?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
There are two important concepts here.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
the problem then depends on "how fast does the fuse operate?".
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Can the fuse protect the electronic devices from lightning instead of a surge protector.
He then describes Rainy Season and Lightning.
so, what happens?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is where the MOV conducts again, and dissipated the energy.
Barnstars:
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
[image of Common-mode choke]
It also is a device that limits the change in current flow.
Here is a simplified AC power diagram.
For this case there are devices called Metal oxide varistors (MOV).
The bolt then partially travels down the line to your home.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This one hit behind the barn.
This is 'the assistant's answer'
2024–10–16 [ OO OLAOYE OYEBODE ]
First Sentence:
But it can get overloaded, and no longer works.
In schematic diagrams this is the symbol for a fuse:
The third is lightning and “how it gets conducted into a home.”
nine
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
The other is “what does a “fuse” do?”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
but I think this circuit , shows a few more pieces.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
What is lightning?